The standard aluminum 3 point bend fixture can be used up to 2.5kN for the aluminum verions and 10kN for steel. The bottom spans are adjustable f...

The articulating bend fixture is used to test ceramics, glass and other brittle materials. The most common testing procedure is ASTM C1161. A 10kN ste...

The 50kN bend fixtures have adjustable span from 20 to 1,000mm or more. There are many different sizes for the contact radius, as well ...

The Big Flex Jig can be designed to go up to 600kN. These types of fixtures are used for flexure testing steel and metal such as in ASTM E29...

The 4 point fixtures are similar to their three point counterparts and come in aluminum (2.5kN) or steel (10kN). The jig that is pictured uses the adj...

The VDA 238-100 bend fixture is specifically designed to test standard sized 60x60mm samples. The fixture bends the sheet metal to 180 degre...

This special type of bend fixture is guided by high strength ball bearing bushings. This apparatus allows for much more uniform testing and helps to p...

ASTM D2344 – Short Beam Strength Testing of Composites ASTM D2344 is a widely used standard test method that determines the apparent interlamin...