Plastics

ASTM D638: Comprehensive Guide to Tensile Testing of Plastics​ ​ ASTM D638 is the definitive standard for determining the tensile properties of ...

Theory: ASTM D695 describes a test method for rigid plastics in compression. There are a few variations in the test, depending on the size of the sam...

Introduction: What Is ASTM D732? ASTM D732 is a standardized test method used to determine the shear strength of plastic materials using a punch-type...

Practice for Determination of Weight and Shape Changes of Plastics Under Accelerated Service Conditions...

ASTM D790 – Flexural Testing of Plastics Introduction to ASTM D790 ASTM D790 is the standard test method for determining the flexural properti...

ASTM D876 covers the testing procedures for nonrigid polyvinyl chloride (PVC) tubing used specifically for electrical insulation applications. This st...

ASTM D882 is a widely recognized standard used to determine the tensile properties of thin plastic sheeting, typically with a thickness of 0.25 mm (0....

Standard Test Method for Bearing Strength of Plastics...

Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting...

Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens...

ASTM D1938 is the standard test method for measuring the tear resistance of plastic films, sheets, and other flexible materials using the trouser tear...

ASTM D2412 is the standard test method for determining the load-deflection characteristics of plastic pipe using parallel plate loading. This method i...

ASTM D2633 outlines standardized test methods used to evaluate the physical, mechanical, and electrical properties of thermoplastic insulation and jac...

Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics...

Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading...

Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading...

Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method...

Test Method for In-Plane Shear Strength of Reinforced Plastics...

Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials...

Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion...

Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic...

ASTM D5458 specifies the standard method for measuring the peel cling (surface adhesion) between layers of stretch wrap film. Peel cling is critical f...

Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film...

Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding...

 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics...

ASTM D6272 outlines the procedure for measuring the flexural properties of unreinforced plastics, reinforced plastics (like composites), and electrica...

ASTM F88 outlines the standard method for measuring the seal strength of flexible barrier materials, typically used in packaging applications like med...

ASTM F1306 is a standard test method used to evaluate the slow rate penetration resistance of flexible barrier films and laminates. This test measures...