100 N (22 lb) Tiny Vise Grips The tiny vise grips are very small — about 1 in by 1.5 in — and built for very low-force tensile tests, in ...
1 kN (225 lb) Small Vise Grips The small vise grips are our most common grip for testing packaging materials and tapes. For a good tensile test, the ...
5 kN (1,000 lb) Tensile Vise Grips The 5 kN (1,000 lbf) vise grips are a slightly larger version of our small vise grips, for stronger soft materials...
5 kN (1,000 lb) Extra Wide Vise Grips The 5 kN extra wide vise grips are designed for specimens between 10 and 100 mm wide, with a maximum opening of...
10 kN (2,000 lb) Large Tensile Vise Grips The large 10 kN vise grips are designed for tensile tests on dual-column universal testing machines. At thi...
20 kN Vise Grips for Extra Tall and Wide Specimens This specially designed vise grip has an opening of 4 in (about 100 mm) for holding extra thick sp...
50 kN+ Heavy-Duty Tensile Vise Grips These heavy-duty vise grips are built for high-force tests on wide, flexible materials, such as tensile strength...
50 kN Extra Wide Vise Grips for ASTM D4595 These 50 kN vise grips are extra wide, accepting specimens up to 8 in wide for wide-width tensile testing ...
60 kN Hydraulic Tensile Vise Grips Hydraulic vise grips are needed for high-strength testing, especially of hard specimens such as ceramics and steel...
Wide-Face Vise Grips for Broad Textile Samples Screw vise grips for thin textile and sheet specimens Wide textile strips tear at the edges if the grip...
Pipe Saddle Branch Tensile Fixture Pull-out fixture for polypropylene saddle branch fittings A saddle branch fitting has to stay on the pipe under ser...
Four-Jaw Chuck Grip for Round Specimens Chuck grips for round specimens of 2 to 250 mm diameter Round bars, tubes, filter elements and housings do not...
EN 1608 Mineral Wool Tensile Grip Needle-plate grip for insulation boards in tension parallel to faces Mineral wool is too soft and fibrous for ordina...
Thumb Screw Bar Grips — 2 and 20 kN Simple bar grips for thin flat specimens For routine tests on thin strips, a simple grip is often the best g...
Dynamic Vise Grip for Composites — 100 kN Bolt-clamped vise grips for composite fatigue tests Under cyclic loading any play in a grip shows up i...
Small Vise Grip — 400 N Compact vise grips with interchangeable jaws for light specimens Packaging films, paper, wires and yarns need a firm gri...
Fine Wire and Narrow Band Grip — 2.5 kN Small screw action grips for fine wires and narrow bands Fine wire is hard, smooth and small in section:...
Wide Sample Vise Grip — 20 kN 220 mm wide vise grips for textiles, manual or pneumatic For wide textile strips the choice between screw and air ...
Screw Action Vise Grip — 46 kN Symmetric steel screw action grips with self-aligning jaws Strong flat specimens such as CFRP laminates and reinf...
ISO 7864 Hypodermic Needle Chuck Grip Chuck grip for tensile testing of single-use hypodermic needles The needle tube must not pull out of its hub. Th...