The Tiny Vise Grips are quite small, they measure about 1 inch by 1.5 inches. They use a special, smaller adapter which can mount onto the more standa...

The Small Vise Grips are the most common for testing packaging materials and tapes. The opening, as well as the grip face size and type...

The 1,000 lb. Vise Grips are very similar to the previous version, just slightly bigger. Standard grip insert sizes are 30x50mm, 30x80, and 30x100. Th...

The 1,000 lb. Extra Wide Vise Grips are designed for samples between 10-100mm. The max opening on the grips is almost 4 inches. A sliding channel is e...

The Large Vise Grips are for use with a dual column Universal Testing Machine for tensile tests. Vise grips at this size can be very finnick...

These grips are good up to 20kN. They are not as commonly seen because most tests will require a wedge grip at this range of force in order ...

This specially designed vise grip has an opening of 4 inches or about 100mm for holding extra thick samples. Extra wide jaw inserts can also be used f...

The 50kN Vise Grips are Extra Wide to accommodate up to 8 inches of sample width. A 100kN version is also available in Steel. The grips can be tighten...

Hydraulic tensile vice grips are necessary for high strength testing especially for hard samples such as ceramics and steel. Our 60kN model can ship c...