This motorized fixture is designed to test rubber O-rings. The fixture turns at an adjustable speed while the machine pulls the sample in tension. Ple...

ASTM D1894 — Coefficient of Friction of Plastic Film & Sheeting ASTM D1894 is used to define the mechanical, surface, and optical performan...

ASTM D1781 — Climbing Drum Peel Test Overview ASTM D1781 is the standard test method used to measure the peel resistance of adhesive bonds in s...

ASTM D3167 Floating Roller Peel Strength of Adhesive Bonds ASTM D3167 defines a peel test method used to evaluate the bond strength of adhesive join...

ASTM D3787 — Ball Burst Puncture Testing of Textiles ASTM D3787 is the standard test method for determining the bursting strength of textile fa...

The ASTM D4964 Tensile Band Clamp Fixture is used to test elastomeric fabrics.  The sample is a loop band and it is pulled apart by the...

The ASTM D695 fixture is used between two compression platens. The fixture suspends the sample in a vertical position so that it can be load...

This tool uses compression to punch a 1 inch diameter hole into a plastic sample. Please see the ASTM D732 overview for more information. I...

ASTM D6862  – 90° Peel Resistance of Adhesive Bonds ASTM D6862 is the standardized test method for determining the peel resistance of ...

The ASTM B913 fixture is a shoulder type tensile grip for performing pull off tests on wire crimps, plugs, and connectors. The disk shaped chuck can b...

ASTM B565 — Standard Test Method for Shear Testing of Aluminum Alloy Rivets is used for shear testing alumnium bolts, rivets, rod, and wire...

The ASTM D1871 fixture is used to measure the adhesion of tire bead wire which is embedded into a vulcanized rubber matrix. A bottom grip is used to p...

The ASTM D2229 fixture is used for testing the adhesion strength of steel tire cords inside a vulcanized rubber matrix. This test is similar to ASTM D...

ASTM C364 is the definitive standard for determining the edgewise compressive strength of sandwich panels, which are widely used in aerospace, marine,...

ASTM D429: Rubber-to-Metal Adhesion Testing Using a Universal Testing Machine ASTM D429 is the primary standard used to evaluate the adhesion strengt...

The ASTM D2290 fixture is used to measure the apparent hoop tensile strength of plastic pipe. A thin cross section of pipe is cut and mounted around t...

ASTM B406 Overview Transverse Rupture Strength Testing of Cemented Carbides ASTM B406 is the primary test method used to determine the transverse ru...

ASTM D2344 Overview Short-Beam Shear Testing of Polymer Matrix Composites The ASTM D2344 method defines how to measure the short-beam strength of po...

ASTM D6641 — Combined Loading Compression (CLC) Test for Polymer Matrix Composites Technical Overview ASTM D6641 is the primary standard used ...

ASTM A185 — Welded Wire Reinforcement (Plain) for Concrete ASTM A185/A185M is the standard specification governing plain (smooth), cold-drawn s...

The ASTM D3354 is used to measure the blocking load force of plastic films. Blocking is an undesirable characterisitc of smooth plastic films to adher...

ASTM C297 Overview – Flatwise Tensile Strength of Sandwich Constructions ASTM C297 is the primary test method used to determine the flatwise te...

The ASTM D7332 fixture is used to test te pull-through resistance of fasteners used in carbon fiber-reinforced polymer matrix composites.  ...

ASTM C307 Tensile Strength Testing of Chemical-Resistant Mortars and Grouts ASTM C307 defines the procedure for determining the tensile strength of ...

The ASTM D7137 is an aerospace specification used to measure the shear strength of polymer matrix composites after they have been damaged by an impact...

ASTM D3410 Combined Loading Compression Fixture The widely recognized method for determining the compressive strength, compressive modulus, and strai...

ASTM E238 ASTM E238 is a standardized test method used to determine the bearing yield strength and ultimate bearing strength of metallic materials su...

ASTM F2118 provides a standardized method for evaluating the long-term fatigue behavior of spinal implant devices—specifically those that are su...

The ASTM F1044 governs a test for measuring the shear strength of a calcium phosphate adhered to a metallic substrate. ...

ASTM D905 — Compression Shear Testing of Adhesive Bonds in Wood Introduction ASTM D905 is one of the most trusted methods for evaluating the s...

ASTM F1306 Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates Introduction ASTM F1306 is a standardi...

ASTM D4501 — Shear Testing of Sandwich Core Materials ASTM D4501 is a standard test method used to determine the shear strength, shear stress r...

ASTM D4833 Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products ASTM D4833 is the primary index test used to det...

ASTM D5379 Iosipescu Shear Test for Aerospace is the standard test method used to determine the in-plane shear properties of fiber-reinforced composi...

ASTM D5458 specifies the standard method for measuring the peel cling (surface adhesion) between layers of stretch wrap film. Peel cling is critical f...

ASTM A370 — Standard Test Methods and Definitions for Mechanical Testing of Steel Products ASTM A370 is the foundational standard used in metal...

ASTM A416 / A416M — Prestressing Steel Strand & Seven-Wire for Prestressed Concrete Explained in Practice ASTM A416 / A416M is the industry...

ASTM C297 — Flatwise Tensile Strength of Sandwich Constructions Technical Overview ASTM C297 is the standard test method used to determine the...

ASTM E9 - Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature 1. Introduction ASTM E9, Standard Test Methods of ...

ASTM F88 Seal Strength Test ASTM F88 / F88M is the primary test method used to determine the seal strength of flexible barrier materials. The standar...

ASTM D3330 Peel Adhesion Testing of Pressure-Sensitive Tape Using a Universal Testing Machine ASTM D3330 is the primary industry standard for measur...

ASTM D6241 Standard Test Method for Static Peel Strength of Electrically Conductive Adhesive Connections ASTM D6241 is a specialized test method us...

ASTM D395 - Compression Fixture for Testing Rubber Materials ASTM D395 is the primary standard used to determine the compression set of rubber materi...