ASTM E643 — Ball Punch (Ball Puncture) Testing of Metallic Sheet Introduction ASTM E643 defines a method for evaluating the formability and du...

ASTM D1414 - Rubber O-Rings (Elastomers Rings Test) Fixture Standard Test Method for Rubber O-Rings — Tensile Strength, Elongation, and Modulus...

ASTM D1894 — Coefficient of Friction of Plastic Film & Sheeting ASTM D1894 is used to define the mechanical, surface, and optical performan...

ASTM D1781 — Climbing Drum Peel Test Overview ASTM D1781 is the standard test method used to measure the peel resistance of adhesive bonds in s...

ASTM D3167 Floating Roller Peel Strength of Adhesive Bonds ASTM D3167 defines a peel test method used to evaluate the bond strength of adhesive join...

ASTM D3787 — Ball Burst Puncture Testing of Textiles ASTM D3787 is the standard test method for determining the bursting strength of textile fa...

ASTM D4964 Overview Elastic Fabric Stretch and Recovery Testing ASTM D4964 is the primary standard used to evaluate the stretch (elongation) and rec...

ASTM D695 — Compressive Properties of Rigid Plastics ASTM D695 is the primary test method used to determine the compressive mechanical properti...

This tool uses compression to punch a 1 inch diameter hole into a plastic sample. Please see the ASTM D732 overview for more information. I...

ASTM D6862  – 90° Peel Resistance of Adhesive Bonds ASTM D6862 is the standardized test method for determining the peel resistance of ...

ASTM B913 - Crimped Wire Pull Through Test, Multi Gauge Fixture Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and...

ASTM B565 — Standard Test Method for Shear Testing of Aluminum Alloy Rivets is used for shear testing alumnium bolts, rivets, rod, and wire...

ASTM D1871 Overview ASTM D1871 is the standard test method used to measure the adhesion between single-filament wire and vulcanized rubber, most comm...

The ASTM D2229 fixture is used for testing the adhesion strength of steel tire cords inside a vulcanized rubber matrix. This test is similar to ASTM D...

ASTM C364 - Sandwich Constructions in Compression ASTM C364 is the definitive standard for determining the edgewise compressive strength of sandwich ...

ASTM D429 – Rubber-to-Metal Adhesion Testing Using a Universal Testing Machine ASTM D429 is the standardized set of methods used to evaluate th...

The ASTM D2290 fixture is used to measure the apparent hoop tensile strength of plastic pipe. A thin cross section of pipe is cut and mounted around t...

ASTM B406 Overview Transverse Rupture Strength Testing of Cemented Carbides ASTM B406 is the primary test method used to determine the transverse ru...

ASTM D2344 Overview Short-Beam Shear Testing of Polymer Matrix Composites The ASTM D2344 method defines how to measure the short-beam strength of po...

ASTM D6641 — Combined Loading Compression (CLC) Test for Polymer Matrix Composites Technical Overview ASTM D6641 is the primary standard used ...

ASTM A185 — Welded Wire Reinforcement (Plain) for Concrete ASTM A185/A185M is the standard specification governing plain (smooth), cold-drawn s...

ASTM D3354 – Blocking Load of Plastic Film with Parallel Compression Platens ASTM D3354 is the standard test method used to determine the block...

ASTM C297 Overview – Flatwise Tensile Strength of Sandwich Constructions ASTM C297 is the primary test method used to determine the flatwise te...

The ASTM D7332 fixture is used to test te pull-through resistance of fasteners used in carbon fiber-reinforced polymer matrix composites.  ...

ASTM C307 Tensile Strength Testing of Chemical-Resistant Mortars and Grouts ASTM C307 defines the procedure for determining the tensile strength of ...

ASTM D7137 - Compression After Impact (CAI) Test Fixture Residual Compressive Strength Testing of Damaged Composite Laminates, Damaged Polymer M...

ASTM D3410 Combined Loading Compression Fixture The widely recognized method for determining the compressive strength, compressive modulus, and strai...

ASTM E238 ASTM E238 is a standardized test method used to determine the bearing yield strength and ultimate bearing strength of metallic materials su...

ASTM F2118 provides a standardized method for evaluating the long-term fatigue behavior of spinal implant devices—specifically those that are su...

ASTM F1044 — Shear Testing of Calcium Phosphate and Metallic Coatings ASTM F1044 is the standard test method used to determine the shear streng...

ASTM D905 — Compression Shear Testing of Adhesive Bonds in Wood Introduction ASTM D905 is one of the most trusted methods for evaluating the s...

ASTM F1306 Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates Introduction ASTM F1306 is a standardi...

ASTM D4501 — Shear Testing of Sandwich Core Materials ASTM D4501 is a standard test method used to determine the shear strength, shear stress r...

ASTM D4833 Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products ASTM D4833 is the primary index test used to det...

ASTM D5379 Iosipescu Shear Test for Aerospace is the standard test method used to determine the in-plane shear properties of fiber-reinforced composi...

ASTM D7078 ASTM D7078 is the standard test method used to determine the in-plane shear properties of polymer matrix composite materials using a V-not...

ASTM A370 — Standard Test Methods and Definitions for Mechanical Testing of Steel Products ASTM A370 is the foundational standard used in metal...

ASTM A416 / A416M — Prestressing Steel Strand & Seven-Wire for Prestressed Concrete Explained in Practice ASTM A416 / A416M is the industry...

ASTM C297 — Flatwise Tensile Strength of Sandwich Constructions Technical Overview ASTM C297 is the standard test method used to determine the...

ASTM E9 - Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature 1. Introduction ASTM E9, Standard Test Methods of ...

ASTM F88 Seal Strength Test ASTM F88 / F88M is the primary test method used to determine the seal strength of flexible barrier materials. The standar...

ASTM D3330 Peel Adhesion Testing of Pressure-Sensitive Tape Using a Universal Testing Machine ASTM D3330 is the primary industry standard for measur...

ASTM D6241 — Static Puncture Strength of Geotextiles Using a 50 mm Probe ASTM D6241 is the standard test method used to determine the static pu...

ASTM D395 - Compression Fixture for Testing Rubber Materials ASTM D395 is the primary standard used to determine the compression set of rubber materi...

ASTM D4032 Overview – Circular Bend Stiffness of Fabrics ASTM D4032 is the standard test method for determining the stiffness of fabrics using ...

ASTM E8/E8M - Tension Testing of Metallic Materials ASTM E8/E8M is the primary North American standard for determining the tensile properties of meta...

ASTM D4541 - Pull-Off Strength of Coatings Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers ASTM D4541 i...

ASTM F459 — Measuring Pull Strength of Microelectronic Wire Bonds ASTM F459 is the standard test method used to determine the pull strength of ...

ASTM D5458 — Standard Test Method for Stretch Wrap Film Performance ASTM D5458 is a widely used test method for evaluating the mechanical stret...

ASTM D638 — Standard Test Method for Tensile Properties of Plastics ASTM D638 is the primary test method used to determine the tensile properti...

ASTM C165 - Standard Test Method for Measuring Compressive Properties of Thermal Insulations ASTM C165 defines the procedure for determining the...

ASTM B571 - Standard Practice(s) for Qualitative Adhesion Testing of Metallic Coatings ASTM B571 is a widely recognized standard practice u...

ASTM C203 - Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation ASTM C203 is the primary standard u...

ASTM C365 - Flatwise Compressive Properties of Sandwich Cores Introduction ASTM C365/C365M is the primary standard used to determine the flatwi...

ASTM D1761 - Standard Test Methods for Mechanical Fasteners in Wood ASTM D1761 is the primary test standard used to evaluate the mechanical performan...

ASTM C393 - Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure ASTM C393 is the primary standard used to d...

ASTM D1000 - Standard Test Methods for Pressure-Sensitive Adhesive Coated Tapes Used for Electrical and Electronic Applications ASTM D1000 is a ...

ASTM D1002 - Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-...

ASTM D1004 - Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting Introduction ASTM D1004 is a standardized mechanical...

ASTM D1621 - Fixture: Strong Compression Platens with bolt on Extensometer ASTM D1621 is the primary test method used to determine the compressive pr...

ASTM D3759 Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape Introduction ASTM D3759 defines the procedure for d...

ASTM D1623 - Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics ASTM D1623 is the primary test method u...

ASTM D1683 – Standard Test Method for Failure in Sewn Seams of Woven Fabrics ASTM D1683 is the primary test method used to evaluate the strengt...

ASTM D6775 — Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape, and Braided Materials Introduction ASTM D6775...

ASTM D5034 - Textiles & Fabrics Tensile "Grab" Test Introduction  ASTM D5034 is the standard test method used to determine the gr...

ASTM D1708 — Microtensile Properties of Plastics ASTM D1708 is one of the standardized test methods used to determine the tensile properties of...

ASTM D1876 — T-Peel Test for Flexible Adhesive Bonds ASTM D1876 is the standard test method used to measure the peel resistance of adhesive bon...

ASTM D3039 Overview: Tensile Properties of Polymer Matrix Composite Materials ASTM D3039 is the primary test method for determining the in-plane tens...

ASTM D882 Overview — Tensile Properties of Thin Plastic Sheeting ASTM D882 is the primary standard used to determine the tensile properties of ...

ASTM D6797 Fixture Overview — Ball Burst Testing Using a Universal Testing Machine Contrasted with ASTM D3787 Diaphragm Burst Method ASTM D679...

ASTM F1342 — Puncture Resistance of Protective Clothing Materials ASTM F1342 is the standard test method used to evaluate the puncture resistan...

ASTM D3574 — Flexible Cellular Materials (Polyurethane Foam) Testing ASTM D3574 is one of the most widely used standards for evaluating the mec...

ASTM D412 — Tensile Properties of Vulcanized Rubber and Thermoplastic Elastomers ASTM D412 is one of the most widely used standards for evaluat...

ASTM D624 — Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers ASTM D624 is the standard test method used to determin...

ASTM D885 — Tire Cord & Organic Manufactured Fibers Tensile Strength Introduction ASTM D885 defines the tensile testing of tire cords, ind...

ASTM E190 — Guided Bend Test of Metallic Materials ASTM E190 defines a guided bend test used to evaluate the ductility and soundness of metalli...